Filter
Top Products
Appendix B — Web Configuration Tool
- 61 -
Table 14 Web Configuration Tool: Dialing Plan
Setting Name Values (bold = default) Notes
Global timer Off | On
When activated, this optional feature forces
all dialed digits to use the inter-digit timer
specified in Timer.
The Dial soft-key will be disabled as the
dialed digits will be dialed automatically
after the timer has expired.
Timer
1 | 2 | 3 | 4| 5 | 6 | 7 | 8 | 9
seconds
Optional parameters sets the duration of the
inter-digit timer. When invoked using the
“.T” parameter or the Global timer setting,
the timer monitors the keypad for a pause in
digit entry. When a pause is detected, the
digits are optionally modified, then sent to
the SIP registration server or alternate
server.
Dialed Digits <blank>
Enter a partial or complete digit string (of a
minimum 2-digit length) for use as a
template to test dialed digits. Matching digit
strings are optionally manipulated, then sent
to a SIP server for dialing
If the value of one or more digits is likely to
be variable, then you can enter the wildcard
character “x” in place of each variable digit.
The square brackets [ ] can be used to
specify a set of digits, any one of which can
match a dialed digit. For example [123]
would yield a positive match if the user dials
“1”, “2” or “3”, but would fail to match “4”.
The “.T” timer parameter (which must be
placed at the end of a digit string) causes
the phone to accept an arbitrary number of
digits form the user. Once the user has
finished entering digits (signaled by no new
digits for a period equal to the timer value),
the digit string:
• may have digit manipulation
performed on it
• is sent to the SIP registration server
without requiring the user to press
the Dial soft key.
Note: The digits to follow field must be
set to 0 for the .T parameter to
work.
Maximum 16 digits.
Digits to follow 0
Optionally, enter the number of digits
expected to follow the partial number
specified under Dialed Digits here.
Digits to remove 0
Optionally, enter the number of leading
dialed digits to be deleted from the dialed
number here.