5055 SIP Phone Features
- 19 -
4.
For Call Forward No Answer, enter how many times the phone will ring before the call is
forwarded.
5. Click the Apply button. A confirmation screen is displayed.
6. Click the OK button. Your SIP Phone is updated.
Using the SIP Phone Menu Interface
1. Press the Menu key.
2. Press the >> softkey until “FEATURE CONFIG?” is displayed.
3. Press the OK softkey. “CALL FORWARDING?” is displayed.
4. Press the OK softkey. “FWD ALWAYS:” is displayed, with its status beside it (“*ON*” or
“*OFF*”).
• If you do not need to change your Call Forward Always settings, go to step 10.
• To program your Call Forward Always settings, continue below.
5. Press the Review softkey. The display shows the current forwarding address.
• If the address is blank and a valid voicemail server URL has been programmed into
SIP Configuration, the SIP Phone will forward calls to your voice mailbox
6. Press the Program softkey to change the address to which the call will be forwarded.
7. To forward your calls to your voice mailbox, press the Yes softkey and continue with
step 10. To forward your calls to another address, press the No softkey and continue with
the next step.
8. Enter the address where your calls will be forwarded.
• To enter a name, press the Name softkey before entering any characters.
• To enter a URL, press the URL softkey before entering any characters.
9. Press the Submit softkey.
10. Press the Next softkey. “FWD NO ANSWER:” is displayed, with its status beside it
(“*ON*” or “*OFF*”)
• If you do not need to change your Call Forward No Answer settings, go to step 14.
11. Press the Options softkey to change the number of rings before a call is forwarded.
12. Enter the number of rings (from 0 to 9) with the keypad, and press the Save softkey.
13. To program your other Call Forward No Answer settings, repeat steps 5 to 9, then
continue below.
14. Press the Next softkey. “FWD BUSY:” is displayed, with its status beside it (“*ON*” or
“*OFF*”)
• To program your Call Forward Busy settings, repeat steps 5 to 9, then continue
below.
• If you do not need to change your Call Forward Busy settings, continue below.
15. Press the Exit softkey, then the Menu key to return to the default display.
Enabling/Disabling Call Forward
Using the Web Configuration Tool
1. Access the Web Configuration Tool (see The Web Configuration Tool on page 7).
2. Click Feature Configuration.