Filter
Top Products
Issue 1 April 1997 85
Feature Descriptions
change announcements
■ Use this form to assign extension numbers that are used to represent
recorded announcement numbers.
change system-parameters hospitality
■ On Page 2 of this form, enter one of the following values in the
Announcement Type field to control the type of announcement used for
wakeup calls:
— external — This is entered when an auxiliary trunk circuit pack is
used to interface to other recorded announcement equipment,
such as the Audichron announcements. If you use this equipment
type, the Auxiliary Board for Announcement field displays
and you must enter the equipment location for that circuit pack.
Assign all four ports for this recorded announcement type.
— mult-integ — This is entered when a TN750C is being used for
recorded announcements. If you use this equipment type, the
Default Announcement Extension field displays and you
must enter an announcement number. Once you have created
some announcements, put the default announcement number in
this field. All announcements must be administered on the
Recorded Announcement form.
— music-on-hold — This is entered when you are using a
music-on-hold device that interfaces to the communications
server.
— silence — This is entered when you have no recorded announce-
ment circuit packs or announcement equipment.
— voice-synthesis — This is entered when a TN725B is being used
for recorded announcements. (This circuit pack is also used by
guests to create their own wakeup calls and Do Not Disturb
requests.) If you use this equipment type, two Announcement
Ports fields display and you must enter two of the four announce-
ment port equipment locations of the TN725B.