Lucent Technologies 1079984G3 Telephone User Manual


 
Issue 1 April 1997 65
Feature Descriptions
change feature-access-codes
On Page 5 of this form, add feature access codes for each of the house-
keeping status codes. There are six codes for housekeeping status from
a guest room (client room) and four codes for housekeeping status from
a designated telephone (station). When working with a PMS vendor, the
feature access codes for the housekeeping status need to be coordi-
nated. The PMS will determine the ASCII format that will equate to the
feature access code.
Required Hardware 0
There is no special hardware required for this feature.
Message Waiting Notification 0
Guests are notified of waiting messages in two ways. Each guest room’s tele-
phone has a message waiting lamp that lights whenever the guest has any mes-
sages. For a visually impaired guest, a special stutter dial tone is heard by the
guest when they pick up their handset if the guest has any messages. After the
guests have retrieved their messages, by calling the voice messaging system or
the front desk, the message waiting lamp is turned off automatically and regular
dial tone is heard.
Message Waiting Notification is a hospitality feature similar to Leave Word
Calling. Message Waiting Notification can be activated only for extensions that
have a “client room” COS (see Page 40). The attendant uses the button
to turn on a message waiting lamp, and the button to turn off a
message waiting lamp.
MW Act
MW Deac