Filter
Top Products
98 Issue 1 April 1997
Voice Messaging
Administration 0
The administration shown here is for the Lucent INTUITY Lodging product but
will also be used for other voice messaging systems. A group of extension num-
bers must be reserved as voice messaging ports. These numbers cannot be
used for anything else.
!
SECURITY ALERT:
Always restrict the voice port COR to Outward Restriction and use
an FRL of 0 to prevent unauthorized calls from being made using
the voice messaging system.
add station XXXX (XXXX is the first voice port used in the voice messaging
hunt group)
■ Use this form to add the first voice messaging port. Administer the port
as a model 2500 telephone to a port on the TN791 circuit pack. Enter
AUDIX 1 in the Name field, and enter y in the Switchhook Flash and
Adjunct Supervision field.
duplicate station XXXX (XXXX is the first voice port used in the voice
messaging hunt group)
■ Use this form to add the rest of the voice messaging ports. After you
issue the command, a duplicate of the first voice port displays, and you
need to change the values in the Extension and Name fields. For exam-
ple, your voice port extensions could be 501, 502, 503, and so on; exten-
sion 501 is named AUDIX 1, 502 is named AUDIX 2, and so on.