Filter
Top Products
40
LCD PRESET MENU
The LCD Preset Menu allows you to execute presets from the Converge Pro front panel. To create presets, use
Console in Preset Mode.
Accessing the Presets Menu
To access the menu, press the Select button on the front panel, use the Menu Dial to select Presets, and press
the Select Button.
The Preset Menu appears as shown below:
PRESET MENU
1-Combine Room
2-UnProgrammed
3-UnProgrammed
4-UnProgrammed
5-UnProgrammed
6-UnProgrammed
7-UnProgrammed
Executing Presets
Use the following procedure to execute presets from the front panel LCD display:
Use the 1. Menu Dial to highlight the preset you want to execute
Press the 2. Select button
Answer 3. Yes at the prompt that appears to run the selected preset, or No to cancel
Press the 4. Esc button to return to the main LCD menu
You can also run presets from the Services menu while Console is in Configuration Mode.
For additional information, refer to the Table of Contents for these related topics:
LCD Programming Overview•
LCD Settings Menu•
LCD Channels Menu•
Preset Mode•
Console Overview•
Services Menu Overview•
Configuration Mode Overview•