Filter
Top Products
237
DIAL – DTMF Dialing
This command dials a DTMF sequence or reports back the last sequence dialed.
Command Form: DEVICE DIAL <Channel> [Number]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17 (R)
Reserved 2 0
Number String 40 1 – 40 Chars of ‘0’ – ‘9’, ‘*’, ‘#’, ‘,’
(Null to query last number dialed in text)
DID – Device ID
This command reports the device id. This command is read only except through the front panel.
Command Form: DEVICE DID [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 See Type And Device IDs
(Null sent in text, Value returned)
DTMFLVL – DTMF Tone Level
This command selects/reports the DTMF tone level.
Command Form: DEVICE DTMFLVL <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17 (R)
Value Signed Float 2 -12.00 – 12.00
(Null to query in text)
dB
DTONELVL – Dial Tone Level
This command selects/reports the audible dial tone level.
Command Form: DEVICE DTONELVL <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17 (R)
Value Signed Float 2 -12.00 – 12.00
(Null to query in text)
dB
DUPDATE – Download Update
This command reports the status of download updates.
Command Form: DEVICE DUPDATE [Channel Group Status Percent Done Message]
Argument Type Size Values Units
Channel Unsigned Integer 1
Group Unsigned Integer 1
Status Unsigned Integer 1 (Null to query in text)
Percent Done Unsigned Integer 1
Message Char 60
DVER – Command Dictionary Version
This command reports the version of the command dictionary being used by the unit. This command is read
only.
Command Form: DEVICE DVER [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 (Sent with a Null in text)