Filter
Top Products
264
REDIAL – Redial the Last Number
This command redials the last number. There is no query for this command.
Command Form: DEVICE REDIAL <Channel>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17 (R)
Reserved 2 0
REFSEL – Reference Select for PA Adaptation & AEC
This command selects/reports which output or expansion bus reference is used for a Mic input as a reference for
power amp adaptation mode and acoustic echo cancellation where applicable.
Command Form: DEVICE REFSEL <Channel> [Ref. Group Ref. Channel]
Argument Type Size Values Units
Channel Channel 1 See 3 (M) in Groups and Channels
Group Group 1 3 (M)
Reference Group Group 1 2, 8, 20 (A, B, E, H, J, O)
Reference Channel Channel 1 See Groups and Channels
(Null to query in text)
REFSET – Reference Channel Set Up
This command selects/reports the output the reference channel tracks.
Command Form: DEVICE REFSET <Channel> [Reference Output]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 20 (B)
Value Reference Output 2 0 = none
See 2 (O) in Groups and Channels
(Null to query in text)
RESET – Reset
Resets the unit. There is no query for this command.
Command Form: DEVICE RESET
No Arguments
RING – Ring Indication
This command indicates a ringing line. This command is reportable only. It cannot be queried or set.
Command Form: DEVICE RING <Channel><Value>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17 (R)
Value Unsigned
Integer
2 0 = Ring Cycle Ended
1 = Ring Cycle Started