Filter
Top Products
140
MATRIX TAB
The Matrix Tab is used to route audio to one or more destinations (outputs, expansion bus, processing, or fader
channels) and to create cross points between channels.
Any number of input-to-output connections can be made in the matrix, with level control at each cross point. Any
input or combination of inputs can be routed to any output or combination of outputs. The channels available in
routing matrix by model are summarized below:
Converge Pro 880: • 36 inputs x 36 outputs
Converge Pro 880T: • 37 inputs x 38 outputs
Converge Pro 880TA: • 39 inputs x 39 outputs
Converge Pro 840T: • 29 inputs x 30 outputs
Converge Pro 8i: • 36 inputs x 24 outputs
Converge Pro TH20: • 15 inputs x 15 outputs
Converge SR 1212: • 36 inputs x 36 outputs
Converge SR 1212A: • 38 inputs x 38 outputs
For more information on connecting input and output devices, see Controls and Connections.
Accessing the Matrix
To access the matrix, select the Matrix Tab from the Tab Bar in Console.
The matrix appears with the current routing configuration displayed for all channels. The functionality of the matrix
screen is described in the following sections.
Routing Legend