Filter
Top Products
PERSONAL OPTIONS
47
Eclipse Associate Display and Basic Digital Phone User Guide
— A prompt tells you what the cascade’s current status is. Perform one of the fol-
lowing steps.
• To program a cascade level: Press and enter the number of the level you
wish to program (1-9). You then have the following options:
— To enable or disable the cascade level: Press . (You cannot enable the
level until a notification number is programmed.)
— To set up or change an extension or telephone number: Press . Then
press if it is an extension number OR press if it is an outside
number. Then enter the number.
— To set up or change a pager number: Press . Then enter the number.
• To set up time of day for notification: Press . Then enter the time you
want the message notification start and stop. Enter the times with two digits
for the hour and two digits for the minutes. If entering the time in 12-hour
format, you will be prompted to press for AM or press for PM.
NOTE: If you wish to have 24-hour notification, program the starting and end-
ing times to be the same.
• To set up the days of the week for notification: Press . Then select one
of the following: Press for Monday-Friday, for all days, or to
select individual days. If you selected individual days, you will be prompted
to press digits 1-7 which correspond to the days Sunday through Saturday.
• To select all or priority-only message notification: Press . Then press
for all messages or for priority messages only.
— The list of options returns. Either select another option, as described above, or
press to save the settings and exit.
1
1
2
1 2
3
2
1 2
3
1 2 3
4
1 2
#