Basic Line 5.2 Phone Telephone User Manual


 
4
ABOUT YOUR PHONE
Eclipse Associate Display and Basic Digital Phone User Guide
Feature Key Functions
The Eclipse telephone system is designed to allow customized feature key layouts.
Your trainer or System Administrator can tell you how your specific phone is
arranged. Also, if your phone has been reprogrammed so that its feature keys do not
match the keys described in this user guide, see your System Administrator. Default
feature codes are listed at the back of this guide.
KEY FUNCTION ACTION REF. PG.
IC or CALL Answer call Press IC or CALL. page 9,
11
OUTGOING Place call Press OUTGOING and dial number. page 10
CALL Answer a call or select
an outside line
Press unlit key to select an outside line or flashing
key to answer a call.
page 9,
11
IC Access intercom call Press IC to access the call. page 9
DND Use do-not-disturb
mode
Press unlit DND to turn on do-not-disturb or press lit
key to turn it off.
page 26
CNF Place a conference
call
Press CNF and dial numbers you would like to add to
the conference.
page 17
HOLD Put call on hold Press HOLD. page 15
TRANSFER Transfer a call Press TRANSFER and dial destination number page 20
SYS SPDL View or dial system
speed-dial numbers
Press SYS SPDL to view the number or select a line;
then press the key to dial.
page 23
STA SPDL View or dial station
speed-dial numbers
Press STA SPDL to view the number or select a line;
then press the
key to dial. (Available on the Asso-
ciate Display phone only.)
page 22
REDIAL Redial a telephone
number
Press REDIAL. page 24
SPKR Put a call on the
speaker
Press SPKR
and hang up.
MSG Leave or listen to a
message
Press MSG. page 18
MUTE Mute the microphone Press MUTE. page 16
FWD Forward call Press FWD
and dial destination number. page 21
Up or Down
Arrow
Adjust volume during
call
Press the up or down arrow key to increase or
decrease the volume.
page 32
SPCL Special key If the Special key is required for feature code entry in
your telephone system, you must always press SPCL
before dialing a feature code. Otherwise, you only
need it to enter a feature code while on a call
Pound Key Used to accept entries, signal the end of a numeric
entry, or to enter a hyphen during numeric entry.
Star Key Used to identify yourself as a voice mail subscriber, to
cancel messages, and to enter a colon during
numeric entry.
#
#