Filter
Top Products
28
PAGING
Eclipse Associate Display and Basic Digital Phone User Guide
PAGING
The Paging feature allows announcements to be made through phone speakers. If your
system is equipped with optional external paging equipment, announcements can also
be made through the external speaker(s).
There can be up to ten paging zones. Each paging zone can contain different combina-
tions of phones and the external paging equipment. Your trainer or System Adminis-
trator can tell you how your paging zones are programmed. You can list them here for
your convenience:
NOTE: Some phones have a PAGE ZONE key, which is programmed to page a spe-
cific zone. If you do not know what page zone is programmed for this key, ask your Sys-
tem Administrator.
Making Pages
— EITHER, Lift the handset, dial , and dial the desired zone number (0-9).
OR, Press the PAGE ZONE key, if your phone has one.
— After the tone, make your announcement.
—Hang up.
To Turn Paging On Or Off
You can enable or disable page receiving for your phone by using the Page Remove/
Replace feature code described below. If your phone is assigned to more than one
page zone, all zones are removed or replaced at once; you cannot turn off individual
zones.
To turn paging on and off for your phone:
— Dial .
0 _______________________ 5 _______________________
1 _______________________ 6 _______________________
2 _______________________ 7 _______________________
3 _______________________ 8 _______________________
4 _______________________ 9 _______________________
7
3 2
5