Filter
Top Products
PROGRAMMING YOUR FEATURE KEYS
31
Eclipse Associate Display and Basic Digital Phone User Guide
Continued on next page.
To turn on Call Forward:
• Enter one of the following Call Forward feature codes.
All Calls............................
If No Answer ....................
If Busy ..............................
If No Answer or Busy.......
• Enter an extension number or enter an outside line access code followed by a
telephone number.
To turn off Call Forward:
• Enter .
—Hang up.
PROGRAMMING YOUR FEATURE KEYS
Depending on how your system is programmed, some of your feature keys may be
designated as “user-programmable.” If so, you can program them with any of the fea-
ture codes listed on the back of this user guide or with extension numbers.
To program a user-programmable feature key:
— With the handset in the cradle, dial .
— Press the feature key you want to program.
— Dial the feature code or extension number you want to store under that key.
(Refer to the back of this guide for default feature codes.)
To return all feature keys to their original default values:
— With the handset in the cradle, dial .
To display the current feature key values:
— With the handset in the cradle, dial .
— Press the feature key(s) you want displayed.
— Press the SPKR key to hang up.
To program a feature key for an outside number:
— Store the outside number in a Station Speed-Dial location using the procedure on
page 22.
— With the handset in the cradle, dial .
— Press the feature key you want to program.
— Enter (this causes the key to access the Station Speed-Dial feature) and
then enter the System Speed-Dial location (0-9) in which you stored the outside
number in the first step.
3
5 5
3
5 6
3
5 7
3
5 8
3
5 5
3
9 7
3
9 5
3
9 6
3
9 7
3
8
2