42
SENDING MESSAGES
Eclipse Associate Display and Basic Digital Phone User Guide
SENDING MESSAGES
— Enter your mailbox as described on page 39.
—Press .
— Dial the desired mailbox number or group list number.
— After hearing the subscriber's name, press to accept it.
— When you hear the tone, record your message.
• To pause while recording, press . To continue, press any key.
• To erase and re-record your message, press .
— When you have completed your message, hang up OR press for the following
options:
To replay your message: Press .
To add to your message: Press and continue your message.
To erase and re-record your message: Press .
To use the special delivery options: Press . You can perform one or more of
the following steps:
• Press to mark the message “private.” (This prevents the recipient from
forwarding it to other subscribers.)
• Press to mark the message “certified.” (When a certified message is
heard by the recipient, you will receive a receipt notice.)
• Press to mark the message “priority.” (This will place your message
ahead of all other waiting messages in the receiving mailbox.)
• Press to cancel delivery options.
• Press to deliver the message. (If you wish to mark the message certified,
private, and/or priority, do so before completing this step.) You may choose
either of the following options:
— Press and enter another mailbox number to send the message to
another destination.
— Press to exit.
2
#
2
3
#
1
2
3
9
1
2
3
#
#