Filter
Top Products
PLACING CALLS ON HOLD
15
Eclipse Associate Display and Basic Digital Phone User Guide
PLACING CALLS ON HOLD
There are two ways to place a call on hold. The first procedure places a call on indi-
vidual hold, the second places it on system hold.
• Individual Hold places the call on hold at one phone. It can then be directly
picked up at that phone or it can be picked up at another phone using the Call
Pickup (Reverse Transfer) feature, accessed by dialing . This feature is
described on page 20.
• An outside call on System Hold can be picked up directly at any phone that
shows a flashing key for the call, including the phone that placed it on hold.
(Intercom calls cannot be placed on system hold.)
To place a call on Individual Hold:
— Press the HOLD key.
—Hang up OR place another call.
— To return to the call, lift the handset and press the flashing key.
To place an outside call on System Hold:
— Press the SPCL key, and dial .
—Hang up OR place another call.
— To return to a call on system hold at any phone with a flashing key, lift the hand-
set and press the flashing key.
4
3 3
5