Filter
Top Products
8
HEADSETS
Eclipse Associate Display and Basic Digital Phone User Guide
Telephone System Features
HEADSETS
For convenience, you can connect an electret headset to your phone. If your headset
has a power-saver mode, make sure the System Administrator has the Headset Con-
nect Tone flag enabled in the telephone system. If this flag is disabled, you may miss
portions of incoming calls.
To connect a headset:
— Unplug the coiled handset cord from the base of the telephone. (Leave the hand-
set in the cradle.)
— Insert the headset plug into the vacant handset jack.
— While on hook, enter the Headset On feature code ( ) or the Headset On/
Off feature code ( ). Display phones will show HEADSET MODE ON.
To disconnect a headset:
— Unplug the headset cord from the base of the phone.
— Plug the coiled handset cord into the vacant jack.
— While on hook, enter the Headset Off feature code ( ) or the Headset On/
Off feature code ( ). Display phones will show HEADSET MODE OFF.
NOTE: If using a headset, press the SPKR key to connect and disconnect calls.
INTERCOM CALLS
Placing Intercom Calls
The Basics
To place an intercom call:
— With or without the handset lifted, dial an extension number.
— If your call goes through handsfree to a phone’s speaker, speak after you hear a
double tone.
If you hear continuous ringing, wait for the call to be answered.
3 1 5
3 1 7
3 1 6
3 1 7