Filter
Top Products
104 Model 6731i IP Phone User Guide
Making Calls
•If you are in Speaker audio mode, lift the handset and press to switch between
handsfree and handset.
•If you are in Speaker/headset audio mode, press to switch between handsfree and
headset.
•When the handset is on hook, press to disconnect the call.
When handsfree is on, the speaker light turns on.
Using a Headset
The 6731i accepts headsets through the modular RJ9 handset jack on the back of the phone.
Contact your telephone equipment retailer or distributor to purchase a compatible headset.
Advanced Volume Controls for the Headset Mic
On the 6731i, there are 3 options for the headset microphone volume. For more information
about the headset microphone, see “Headset Mic Volume” on page 28.
To change the volume:
1. Press to enter the Options list.
2. Select Preferences and press 4.
3. Use 2 to scroll down to Set Audio and press 4 to select.
4. Press 2 to scroll down to Headset/Mic Volume and press 4 to select.
5. Use 2 to scroll down the list and press 4 to select your desired volume.
6. Press 4 to save changes and 3 to exit.
7. If you do not wish to save changes, press 3 to return to the previous screen.
Note: The 6731i supports handsets or headsets using the same jack. Both a
handset and a headset cannot be connected at the same time.
Note: Customers should read and observe all safety recommendations contained
in headset operating guides when using any headset.
IP Phone UI
Note: By default, the volume for the headset microphone is set to medium.
Speaeakerer
Sp
ea
eak
er
er
Goodbye
Goodbye
Options
Options