Aastra Telecom 6731I IP Phone User Manual


 
100 Model 6731i IP Phone User Guide
Line Keys and Programmable Keys
5. To receive RTP steams for Group Paging, you must also configure the "Paging Listen
Addresses" parameter at the path, Basic Settings->Preferences->Group Paging RTP
Settings. For more information about setting this parameter, see “Group RTP Paging
(receives RTP streams)” on page 175.
6. Click to save your changes
Using the Paging Key
The following procedure describes the use of the Paging key on the IP Phone. The procedure
assumes you have already configured the Paging key using the Aastra Web UI.
1. On the IP Phone, press the key you configured for Paging.
The phone opens a multicast RTP session and an outgoing OR incoming phone screen
displays as follows:
2. Press the Drop key to end the multicast RTP session and return to the idle screen.
IP Phone UI
Notes:
1. Recipient of a Paging call can set a global “Do Not Disturb” (DND) to ignore
any incoming pages.
2. For incoming Paging, the phone uses the Intercom configuration settings. The
incoming Page is dependant on the “Allow Barge-In” parameter setting and the
“Idling/On Call” state.
Note: If you enable global DND on the phone, the incoming multicast RTP
session is dropped.
Paging 00:01
= Drop