Filter
Top Products
Chapter 4 Wizard Setup
P-2304R-P1 Series User’s Guide
58
4.2.5.1 Ethernet
Figure 21 Connection Wizard > IP Address (Ethernet)
The following table describes the labels in this screen.
Table 16 Connection Wizard > IP Address (Ethernet)
LABEL DESCRIPTION
My WAN IP
Address
Enter the IP address provided by your ISP.
My WAN IP
Subnet Mask
Enter the subnet mask provided by your ISP.
Gateway IP
Address
Enter the gateway provided by your ISP. If your ISP did not provide one, leave it
blank.
DNS Server Address Assignment (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice
versa. The DNS server is extremely important because without it, you must know the IP address of a
computer before you can access it. The ZyXEL Device uses a system DNS server (in the order you
specify here) to resolve domain names for VPN, DDNS and the time server.
First DNS Server
Second DNS
Server
Third DNS Server
Select From ISP if your ISP dynamically assigns DNS server information. (In this
case, the ISP assigns the WAN IP address too. See Network > WAN > Internet
Connection.) The field to the right is read-only, and it displays the IP address
provided by your ISP.
Select User-Defined if you have the IP address of a DNS server. You might get it
from your ISP or from your network. Enter the IP address in the field to the right.
Select None if you do not want to use this DNS server. If you select None for all of
the DNS servers, you must use IP addresses to configure the ZyXEL Device and
to access the Internet.