ZyXEL Communications P-2304R-P1 Series Telephone User Manual


 
Chapter 12 Firewall
P-2304R-P1 Series User’s Guide
142
12.3.2 Firewall Services Screen
Use this screen to enable service blocking, to set up the date and time service blocking is
effective, and to maintain the list of services you want to block. To access this screen, click
Security > Firewall > Services.
Figure 73 Security > Firewall > Services
Each field is described in the following table.
Packet Direction This field displays each direction that packets pass through the ZyXEL Device.
Log Select the situations in which you want to create log entries for firewall events.
No Log - do not create any log entries
Log Blocked - (LAN to WAN only) create log entries when packets are blocked
Log Forwarded - (WAN to LAN only) create log entries when packets are
forwarded
Log All - create log entries for every packet
Apply
Click this to save your changes and to apply them to the ZyXEL Device.
Reset Click this to set every field in this screen to its last-saved value.
Table 58 Security > Firewall > General
LABEL DESCRIPTION
Table 59 Security > Firewall > Services
LABEL DESCRIPTION
Service Setup
Enable Services
Blocking
Select this to activate service blocking. The Schedule to Block section controls
what days and what times service blocking is actually effective, however.