ZyXEL Communications P-2304R-P1 Series Telephone User Manual


 
Chapter 2 Introducing the Web Configurator
P-2304R-P1 Series User’s Guide
38
Phone Analog Phone Use this screen to set up which SIP accounts use which phone ports for
incoming and outgoing calls.
Common Use this screen to configure general phone port settings.
Region Use this screen to set up regional and call service settings.
Phone Book Incoming Call
Policy
Use this screen to set up call forwarding rules.
Speed Dial Use this screen to configure speed dial numbers for SIP phone numbers.
Security
Firewall General Use this screen to activate/deactivate the firewall and log packets related to
firewall rules.
Services Use this screen to enable service blocking (LAN to WAN firewall rules).
Content Filter Filter Use this screen to block sites containing certain keywords in the URL.
Schedule Use this screen to set the days and times for the ZyXEL Device to perform
content filtering
Management
Static Route IP Static Route Use this screen to configure IP static routes.
Bandwidth
MGMT
Summary Use this screen to enable bandwidth management on an interface and set
the maximum allowed bandwidth and scheduler for the interface.
Class Setup Use this screen to define bandwidth classes.
Monitor Use this screen to view bandwidth class statistics.
Remote MGMT WWW Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the ZyXEL Device.
Telnet Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the ZyXEL Device.
FTP Use this screen to configure through which interface(s) and from which IP
address(es) users can use FTP to access the ZyXEL Device.
SNMP Use this screen to configure your ZyXEL Device’s settings for Simple
Network Management Protocol management.
DNS Use this screen to configure through which interface(s) and from which IP
address(es) users can send DNS queries to the ZyXEL Device.
Security Use this screen to change your anti-probing settings.
UPnP General Use this screen to enable UPnP on the ZyXEL Device.
Maintenance
System General Use this screen to configure general system settings.
Dynamic DNS Use this screen to set up dynamic DNS.
Time Setting Use this screen to change your ZyXEL Device’s time and date.
Logs View Log Use this screen to view the logs for the categories that you selected.
Log Settings Use this screen to change your ZyXEL Device’s log settings.
Tools Firmware Use this screen to upload firmware to your ZyXEL Device.
Configuration Use this screen to backup and restore the configuration or reset the factory
defaults to your ZyXEL Device.
Restart Use this screen to reboot the ZyXEL Device without turning the power off.
Table 3 Navigation Panel Summary
LINK TAB FUNCTION