Filter
Top Products
Mechanical Installation MultiVOIP User Guide
96
19-Inch Rack Enclosure Mounting Procedure
Attaching the MultiVOIP to a rack-rail of an EIA 19-inch rack enclosure will
certainly require two persons. Essentially, the technicians must attach the
brackets to the MultiVOIP chassis with the screws provided, as shown in
Figure 3-7, and then secure unit to rack rails by the brackets, as shown in
Figure 3-8. Because equipment racks vary, screws for rack-rail mounting are
not provided. Follow the instructions of the rack manufacturer and use screws
that fit.
1. Position the right rack-mounting bracket on the MultiVOIP using
the two vertical mounting screw holes.
2. Secure the bracket to the MultiVOIP using the two screws provided.
3. Position the left rack-mounting bracket on the MultiVOIP using the
two vertical mounting screw holes.
4. Secure the bracket to the MultiVOIP using the two screws provided.
5. Remove feet (4) from the MultiVOIP unit.
6. Mount the MultiVOIP in the rack enclosure per the rack
manufacture’s mounting procedure.
x
x
Figure 3-7: Bracket Attachment for Rack Mounting
(MVP-2410/3010 & MVP-410x/810x)
Figure 3-8: Attaching MultiVOIP to Rack Rail
(MVP-2410/3010 & MVP-410x/810x)