Filter
Top Products
Technical Configuration (Digital Voips) MultiVOIP User Guide
134
The IP Parameters fields are described in the table below.
IP Parameter Definitions
Field Name Values Description
Enable Diffserv Y/N Diffserv is used for QoS
(quality of service). When
enabled, the TOS (Type of
Service) bits in the IP
header are configured so
that routers supporting
Diffserv can give priority to
the VOIP’s IP packets.
Disabled by default.
Frame Type Type II, SNAP Must be set to match
network’s frame type.
Default is Type II.
IP Address 4-places, 0-255 The unique LAN IP address
assigned to the MultiVOIP.
IP Mask 4-places, 0-255
Subnetwork address that
allows for sharing of IP
addresses within a LAN.
Gateway 4-places, 0-255 The IP address of the device
that connects your MultiVOIP
to the Internet.
Enable DNS Y/N
(feature not yet
implemented; for
future use)
Enables Domain Name
Space/System function
where computer names are
resolved using a worldwide
distributed database.
DNS Server IP
Address
4-places, 0-255.
(feature not yet
implemented; for
future use)
IP address of specific DNS
server to be used to resolve
Internet computer names.
FTP Server
Enable
Y/N
See “FTP Server
File Transfers” in
Operation &
Maintenance
chapter.
MultiVOIP unit has an FTP
Server function so that
firmware and other
important operating
software files can be
transferred to the voip via
the network.