Filter
Top Products
MultiVOIP User Guide Overview
25
E1 LED Descriptions
MVP3010 Front Panel LED Definitions
LED NAME DESCRIPTION
Power Indicates presence of power.
Boot
After power up, the Boot LED will be on for about 10
seconds while the MVP3010 is booting.
RCV Receive. Lights when receiving data on Ethernet port.
XMT Transmit. Lights when transmitting data on Ethernet
port.
LNK Link. When lit, VOIP “sees” the hub or network via
the Ethernet connection.
COL Collision. Lit when data collisions occur.
T1 T1. Not supported.
E1 E1. When lit, indicates presence of E1 connection.
PRI PRI. On if E1 line is of ISDN-Primary-Rate type.
ONL Online. This LED is on when frame synchronization
has been established on the T1/E1 link.
IC IC LED is on when Internal Clocking is selected in
T1/E1 configuration.
LC Indicates Loss of Carrier.
LS Indicates Loss of Signal.
Test For testing purposes only. For testing purposes only.