Filter
Top Products
Analog Phonebook MultiVOIP User Guide
372
Phonebooks for Series II analog MultiVOIP units (MVP130, MVP210,
MVP210G, MVP410, MVP410G, MVP810, and MVP810G) and BRI
MultiVOIP units (MVP410ST/810ST) are, in principle, configured the same as
phonebooks for digital MultiVOIP products that would operate in the same
environment (under either North American or European telephony standards,
T1 or E1).
Therefore, if you are operating an analog MultiVOIP unit in a North American
telephony environment, you will find useful phonebook instructions and
examples in Chapter 7: T1 Phonebook Configuration. If you are operating an
analog MultiVOIP unit in a European telephony environment, you will find
useful phonebook instructions and examples in Chapter 8: E1 Phonebook
Configuration.
Most of the examples in Chapters 7 and 8 describe systems containing both
digital and analog MultiVOIP units.
You will also find useful information in Chapter 2: Quick Start Guide. See
especially these sections:
Phonebook Starter Configuration
Phonebook Tips
Phonebook Example (One Common Situation)
Chapter 2 also contains a “Phonebook Worksheet” section. You may want to
print out several worksheet copies. Paper copies can be very helpful in
comparing phonebooks at multiple sites at a glance. This will assist you in
making the phonebooks clear and consistent and will reduce ‘surfing’ between
screens on the configuration program.