Filter
Top Products
MultiVOIP User Guide Embedded Gatekeeper
469
12. MVP200. In the Phone Directory Database screen, click on the
“Gatekeeper” radio button to put the MVP200 under the control of the
MVP410G gatekeeper. Under “RAS Parameters” in the IP Address field,
enter the IP address of the gatekeeeper. In this case, since the MVP410G
uses a single IP address for both its gateway and its gatekeeper functions,
we simply use the MVP410G’s regular (and only) IP address
(192.168.80.12). Then add the two required destination patterns: 6000 will
direct calls to the analog phone in the Rootersville office; 6 will give remote
users access to the Rootersville area PSTN (calls can be completed in a
single dialing sequence).
Rootersville MVP200 MultiVOIP
13. MVP200.When you have completed the configuration, click OK on the
Phonebook Directory Database screen. Then go to the
MultiVOIP 200 main screen and click on Download Setup
to save the configuration.