Filter
Top Products
MultiVOIP User Guide Embedded Gatekeeper
505
Network Parameter Definitions (cont’d)
Field Name Values Description
Line Hunting
Information
Call to Out-
of-Service
Supplier
Y/N “Y” enables the sending of RAI
messages. In a normal scenario, the
gatekeeper will hunt among all the
available endpoints that have been
registered using the same tech-prefix.
Each endpoint can inform the gatekeeper
about its resource availability using an
RAI (Resource Available Indication)
message. Upon receiving an RAI
message from an endpoint, the gatekeeper
would consider that endpoint as an Out-
of-Service Supplier. The ‘Almost Out of
Resources’ configuration would allow the
gatekeeper to hunt such Out-of-Service
Supplier endpoints for routing the calls.
Remove
H.245 Addr
in Call Hunt
Y/N When selected, the gatekeeper will not
convey in its outgoing setup message the
H.245 address received in an incoming
setup message. This prevents H.323
terminals from establishing a channel for
a call only to refuse the call later.
Service
Configurable
Properties
Y/N When “Y” is selected, the gatekeeper will
perform a Priority Based Line Hunting
among those destinations registered using
the same tech-prefix.