Filter
Top Products
Technical Configuration (Analog/BRI) MultiVOIP User Guide
266
Supplementary Services Definitions (cont’d)
Field Name Values Description
Call Name
Identification
Enable
Enables CNI function. Call Name
Identification is not the same as Caller ID.
When enabled on a given voip unit
currently being controlled by the
MultiVOIP GUI (the ‘home voip’), Call
Name Identification sends an identifier
and status information to the
administrator of the remote voip involved
in the call. The feature operates on a
channel-by-channel basis (each channel
can have a separate identifier).
If the home voip is originating the call,
only the Calling Party field is
applicable. If the home voip is receiving
the call, then the Alerting Party, Busy
Party, and Connected Party fields are
the only applicable fields (and any or all
of these could be enabled for a given voip
channel). The status information confirms
back to the originator that the callee (the
home voip) is either busy, or ringing, or
that the intended call has been completed
and is currently connected.
The identifier and status information are
made available to the remote voip unit
and appear in the Caller ID field of its
Statistics – Call Progress screen. (This is
how MultiVOIP units handle CNI
messages; in other voip brands, H.450
may be implemented differently and then
the message presentation may vary.)