Multi-Tech Systems MVP-3010 IP Phone User Manual


 
MultiVOIP User Guide Call States/Reasons
553
Call Reasons Listing (cont’d)
No State Description
16 No Change. Service
Prohibited
The reason for address resolution. The
required service is not allowed for the
endpoint.
17 Zone Prefix
Removed
The reason for address resolution after the
zone prefix was removed.
18 Exit Zone Prefix
Removed
The reason for address resolution after the
exit zone prefix was removed.
19 Ip Address Set The reason for address resolution after the
IP address was found from the aliases.
20 Address Forwarded The reason for address resolution after
finding that the call should be forwarded.
21 Address Found The reason for state
AddressResolutionDone.
22 Need to Send LRQ The reason for state
AddressResolutionDone.
23 Failure in App. Event
Handler
The call cannot be completed because of a
failure in the application event handler. (For
example, the return value < 0.)
24 Internal Failure The call cannot be completed because of an
internal error.
25 Service Not Allowed The call cannot be completed because a
required service is not allowed.
26 Exit Zone Not
Allowed
The call cannot be completed because it was
dialed without an exit zone prefix, or the
exiting zone is not allowed for call.
27 No Destination in
Call
The call cannot be completed because it was
dialed without a destination.
28 Cannot Send LRQ The call cannot be completed because an
LRQ cannot be sent.
29 Address Not Found
after LRQ
The call cannot be completed because an
LCF was not accepted for the LRQ.
30 Call Not Register The reason for sending a DRJ.
31 Origin Connected
First
The reason for a Connect message that
arrives without first asking the application.
This happens when the origin is already
connected when the destination connects,
which is an error.
32 DCF to Origin A DCF was sent to the origin.
33 DCF to Dest A DCF was sent to the destination.
34 App. Disconnected
Destination
An application initiated disconnect of the
destination (associated with the Call Cannot
Complete state or with GK Disconnect Call
state.)