Filter
Top Products
MultiVOIP User Guide Technical Configuration (Analog/BRI)
263
the channel over which the call is being originated (for example, “Calling
Party - Omaha Sales Office Line 2”). If that voip channel is dedicated to a
certain individual, the descriptor could say that, as well (for example
“Calling Party - Harold Smith in Omaha”). When the home voip receives a
call from any remote voip, the home voip sends a status message back to
that caller. This message confirms that the home voip’s phone channel is
either busy or ringing or that a connection has been made (for example,
“Busy Party - Omaha Sales Office Line 2”). These messages appear in the
Statistics – Call Progress screen of the remote voip.
Note that Supplementary Services parameters are applied on a channel-by-
channel basis. However, once you have established a set of supplementary
parameters for a particular channel, you can apply this entire set of parameters
to another channel by using the Copy Channel button and its dialog box. To
copy a set of Supplementary Services parameters to all channels, select “Copy
to All” and click Copy.