Filter
Top Products
MultiVOIP User Guide E1 PhoneBook Configuration
349
6. When your Outbound and Inbound PhoneBook entries are completed, click
on Save Setup in the sidebar menu to save your configuration.
You can change your configuration at any time as needed for your system.
Remember that the initial MVP3010 setup must be done locally using the
MultiVOIP program. However, after the initial configuration is complete, all
of the MVP3010 units in the VOIP system can be configured, re-configured,
and updated from one location using the MultiVoipManager software program.
E1 Phonebook Examples
To demonstrate how Outbound and Inbound PhoneBook entries work in an
international VOIP system, we will re-visit our previous example in greater
detail. It’s an international company with offices in London, Paris, and
Amsterdam. In each office, a MVP3010 has been connected to the PBX
system.
3 Sites, All-E1 Example
The VOIP system will have the following features:
1. Employees in all cities will be able to
call each other over the VOIP system
using 4-digit extensions.
2. Calls to Outer London and Inner
London, greater Amsterdam, and greater
Paris will be accessible to all company
offices as local calls.
3. Vendors in Guildford, Lyon, and
Rotterdam can be contacted as national
calls by all company offices.
Note that the phonebook entries for Series II analog MultiVOIP used in Euro-
type telephony settings will be the same in format as entries for the MVP3010.