HP (Hewlett-Packard) Jornada 520 PDAs & Smartphones User Manual


 
Chapter 4 | Connecting to the Internet | 49
Before you can use a modem to connect to an ISP or to dial in to a specific
desktop PC, you must create a connection for that service on your HP
Jornada. If you use an NIC to connect to a corporate network, you must
configure your network connection. Your HP Jornada will recognize the
connection once you attach the network cable to the NIC.
=XL[NJ]NJMRJU^YLXWWNL]RXW]XJW2<9X[J\YNLRORL9,
1. Install a modem or NIC. For more information, see Connecting your
HP Jornada earlier in this chapter.
2. On the
Start
menu, tap
Settings
, and then tap the
Connections
tab.
3. Tap the Modem icon.
4. Tap
New Connection
.
5. Enter a name for the connection. The name can be anything you
want, but it should describe the connection, for example, corporate
dialup.
6. Select the make and model of your modem from the list. If your
modem is not listed, it may be installed incorrectly. Refer to the
manufacturers instructions to be sure.
7. Select the baud rate. The selected rate must be supported by both
your modem and the ISP or network computer you will connect to. If
you are not sure about the rate, contact your account administrator.
8. If your ISP or account administrator provided specific settings, such
as IP addresses, DNS addresses, or parity or flow controlor if your
connection uses SLIPtap
Advanced
, and enter this information on
the appropriate tab.
9. Tap
Next
, and then enter the telephone number you dial to connect
to your ISP or network computer.
10. Tap
Next
, and then set dialing options.
11. Tap
Finish
.
12. On the
Dialing
tab, select your dialing location and set any
necessary options or dialing patterns. (For a description of dialing
strings and dialing options, see online Help on your HP Jornada.)
To establish a connection, follow the procedure To connect to an ISP or
desktop PC, below.
=XLXWORP^[NJWN]`X[TLXWWNL]RXW
1. On the
Start
menu, tap
Settings
, and then tap the
Connections
tab.
2. Tap the Network icon.
3. On the
Adapters
tab, select the name of your CompactFlash card
NIC in the list of installed adapters.