Fujitsu SRS-1050 Telephone User Manual


 
SRS-1050 Local Features ( Chapter 3
Page 3-20
A screen appears showing the
current status of the intercom
feature. If one- or two-way
intercom is enabled, the screen
displays the enabled mode plus
the authorized Directory Number
(see step 4 below). If the intercom
is disabled, the screen displays
NON SUPPORTED.
INTERCOM FEATURE (1)
NON SUPPORTED
To program the first number, go
to step 2. To program the second
or third number, press NEXT
(softkey 2) to display (2) or (3) on
the screen.
2. Press ENTER.
The call announce intercom
selection screen appears:
1:ONE WAY 2:TWO WAY
3:TURN OFF (SELECT 1-3)
3. To enable the intercom feature,
dial 1 or 2 and press ENTER. A
screen appears showing your
choice and prompting for an
authorized Directory Number
(see step 4).
To disable the intercom feature,
dial 3 and press ENTER. When
the screen displays the message
INTERCOM TURNED OFF, press
REG (softkey 4) to return to
normal operation.