Fujitsu SRS-1050 Telephone User Manual


 
Chapter 2 ( SRS-1050 Voice Features
Page 2-17
To mute the microphone
while in handsfree operation,
press MIC-OFF.
The associated LED will turn red.
You can still hear the called or
calling party, but no sound will be
transmitted from your phone.
This allows you to have a private
conversation with others in the
room. Once turned off, the
microphone stays off, even after
you start a new handsfree call,
until you press MIC-OFF again.
To turn the microphone on
again and resume your
conversation, press MIC-OFF
again.
The MIC-OFF key LED goes out.
You can now continue the
conversation. Once turned on,
the microphone stays on until
you press MIC-OFF again, or pick
up the handset.
The MIC-OFF key may be used in
the same way to mute the
microphone on a handset call or
reactivate the microphone as
needed.
REDIAL
Dials the last number dialed
on this phone
REDIAL lets you redial the last
number dialed with the phone.
This feature is useful if you need
to call someone back a second
time, perhaps because their line
was busy the first time.
Using REDIAL before lifting
the handset or pressing
SPEAKER
1. Press REDIAL. The last number
dialed appears on the display
and is redialed automatically in
handsfree mode. Pick up the
handset if you want this to be a
handset call.
2. If there are no idle Call
Appearances available, pressing
REDIAL brings the number to
the screen but does not dial.
When an idle Call Appearance
later becomes available,
pressing the CA button dials
the number in handsfree mode.
(Lift the handset, if you prefer.)