Filter
Top Products
SRS-1050 Local Features ( Chapter 3
Page 3-14
2. Press 2, ENTER, and this screen
appears:
SUPPORTED (SELECT)
SELECT ASSIGN KEY
If ALL (default) was previously
set, all feature buttons light green.
Only Call Appearances with lit
LEDs will log unanswered calls.
Press the buttons to turn the
LEDs on or off to select the Call
Appearances for which you want
to log unanswered calls.
3. Press ENTER when done, and
this screen appears:
SUPPORTED (SELECT)
COMPLETED
After about 15 seconds, or if you
press asterisk (*), the display
returns to the second Service
Mode screen:
4: UNA 5: H-FREE
6: HAND/HEAD SELECT ITEM (1-12)
4. You can now select a different
menu function, or press REG
(softkey 4) to return to the
normal display.
Disabling the UNA Feature
To disable unanswered call
logging, follow these steps:
1. Press REG (softkey 4), 4, ENTER
(softkey 1).
If the following screen appears,
the feature is enabled:
UNA SERVICE MODE
SUPPORTED (ALL)
To leave it as is, press REG again.
2. To disable UNA, press ENTER.
This screen appears:
1: ALL 2: SELECT
3: NO SUPPORT SELECT ITEM
(1-3)
3. Now press 3, ENTER, and this
screen appears:
NON SUPPORTED
COMPLETED
After about 15 seconds, or if you
press asterisk (*), the display
returns to the second Service
Mode screen:
4: UNA 5: H-FREE
6: HAND/HEAD SELECT ITEM (1-
12)