Filter
Top Products
Chapter 3 ( SRS-1050 Local Features
Page 3-9
• Before pressing ENTER to
record the number, press
CLEAR (softkey 3) to erase the
number. Then enter the correct
number.
• After pressing ENTER, if the
number on the COMPLETED
screen is incorrect, press the
multifunction button again.
The ENTER DIRECTORY
NUMBER screen appears
showing the incorrect number.
Enter the correct number and
then press ENTER. The correct
number appears on the display
as you enter it and replaces the
incorrect number.
Changing or Canceling the
Number Stored in a One-
Touch Button
To change or cancel the one-
touch number currently stored on
a one-touch button, follow these
steps:
1. Press the assigned one-touch
button (it shows a green
indicator), and then press the
replacement numbers on the
keypad, or clear the Directory
Number by pressing CLEAR
(softkey 3). You can also leave
the button as it was, by
pressing another button or REG
(softkey 4).
If you press CLEAR, you can
then choose one of the following:
a. Enter new keypad numbers,
followed by ENTER (softkey
1). The button then has the
new number stored.
or
b. Select another button to
become one-touch, then do
steps 3 & 4 from
Programming a One-Touch
Button. This leaves the
original button with its old
number.
or
c. Cancel the preset button by
pressing ENTER. Its LED
turns off. It is no longer a
one-touch button. The
following screen appears:
DN= (12)
COMPLETED
The word COMPLETED remains
for 15 seconds.
2. You can then select another
button to make one-touch and
do steps 3 & 4 from
Programming a One-Touch
Button.
3. To return to the menu screen
after the word COMPLETED
appears, press asterisk (*).