Filter
Top Products
Chapter 2 ( SRS-1050 Voice Features
Page 2-23
Each time you press UNA
(softkey 1), the data for the next
unanswered call is displayed.
The list cycles: the first display is
information from the oldest call,
then the next oldest call, and so
forth. After the data for the most
recent unanswered call is
displayed, pressing UNA again
shows the oldest call's data.
If a new unanswered call is from
the same party as one already in
the UNA list, only the new call's
data is retained. This feature
prevents filling all eight available
positions with calls made from the
same number.
Each record is retained until you
follow the deletion procedure
described below, or until another
unanswered call stores new
information over it.
Returning a Call
To return a call displayed by
unanswered call logging, follow
these steps:
1. Press any idle Call Appearance
button. (Handsfree mode is
automatic. For handset use, lift
the handset.)
You can also dial the number
while onhook, and then lift the
handset or press SPEAKER
after dialing all the digits.
2. Dial the number shown on the
UNA display.
As soon as you go offhook or
begin dialing the number while
onhook, the unanswered call
number shifts to the second line
for reference. The first line
shows the digits you are dialing.
If the call is answered, you can
converse with the party reached.
If not, hang up by replacing the
handset in its cradle or, in
handsfree mode, hang up by
pressing the SPEAKER button.
If the UNA dot on the display is
flashing, you should delete at
least one entry to prevent the loss
of the oldest entry.
Deleting a Record from the
UNA-LIST
To delete a record, press UNA
(softkey 1) until the record is
displayed, and then press # and
CLEAR (softkey 3). To see or
delete the next UNA record, you
must press UNA again.