Filter
Top Products
120
TalkSwitch User Manual
Touch-tone features dialed from a Local Extension.
Command
1x1-1x8
2x1-2x8
250-299
300-309
<flash> if
connected to a
caller
<flash> at
internal dialtone
<flash> at
external dialtone
1x1-1x8
2x1-2x8
4x0-4x9
1x1-1x8
2x1-2x8
4x0-4x9
<flash>4
0
Function performed
Intercoms a Local Extension
Dials a Remote Extension (associated
with an external phone number).
Speed dial for VoIP calls. TalkSwitch will
hunt the VoIP ports, go off hook then
dial the digits entered.
Dials an Extension Ring Group. 10 in
total for the entire system. Mapped to
local extension(s), with specific fall
through options.
Puts caller on hold.
It retrieves the most recent caller put on
hold.
Switches to internal dialtone. Used
mainly when an extension has Direct
Line Access enabled.
Dials into a local ext. voice mailbox.
Dials into a remote ext. voice mailbox.
Dials into a general ext. voice mailbox.
Internal voicemail retrieval/access.
accesses the mailbox associ-
ated to that extension.
Completes a transfer and returns to
internal dialtone
External P.A. Access
Notes
x represents the Unit ID
x represents the Unit ID
After putting a caller on hold, you receive
internal dialtone.
To retrieve the caller on hold for the most
time, dial 7 at internal dialtone
To transfer a caller to a mailbox, press
‘flash’ to place a call on hold, then 1x1-
1x8, 2x1-2x8, or 4x0-4x9 and
hang up.
x represents the Unit ID
To retrieve voicemail.
x represents the Unit ID
Action performed after putting a caller on
Hold then dialing an indented destination.
To make an announcement through the
attached external P.A. system.
Networked
Networked
Networked
Networked
TS manual 11th ED_CVA_v11_CD_Release.qxd 7/13/2004 3:36 PM Page 120