Filter
Top Products
75
3.15 Disk Format
Function
Formats the RAM disk or user drive.
Fig. 3.18
Operation
In the screen shown above, use the “2” or “8” key to select whether the RAM disk or user drive is to
be formatted, then press the “RET” key.
This makes the following screen appear. In this screen press the “1” key to move the cursor onto
"YES" and press the “RET” key to start formatting. If either the “RET” key is pressed while the
cursor is on “NO”, or “CLR” key is pressed while the cursor is on “YES”, the formatting operation
will be canceled.
Fig. 3.19 Fig. 3.20