Filter
Top Products
56
3.2 Basic Operation
In the system menu a common set of key operations are used. The following list shows the
keys that can be used in the system menu.
Current Condition Key Operation Operation Process
8 Moves the line selection cursor up one line.
2 Moves the line selection cursor down one line.
CLR Moves the line selection cursor to the upper
menu area, if it is located in the lower menu
area.
Line cursor is on
RET Confirms and executes the currently selected
menu item.
0 to 9 Selection of an item or entry of a numeric
value.
RET Confirms the currently selected execution item.
Others
CLR Cancels the currently selected execution item.
If "FILE TRANSFER" or "MAINTENANCE" is selected for the first time after the system
menu is initiated, the operator is required to enter a password for system security purposes.
For information about password entry refer to Chapter 3.17 “Password Entry".
3.3 List of Functions
Command Screen Description
Key Click Sound Switch ON or OFF the key click sound.
Buzzer Volume Set volume of buzzer.
LCD Contrast Adjust the brightness of contrast.
Auto Backlight Set the control of auto backlight.
Auto Power OFF Set auto power off.
SYSTEM SETUP
Calibration Adjust the calibration on touch panel.
Ymodem Batch Start up the YMODEM utility.FILE TRANSFER
(requires password)
FLINK (IrDA) Start up the FLINK utility.
Set Date/Time Set date and time.
MS-DOS Command Set the command entry mode.
RAM Disk Size Change the size of RAM DISK.
Format Disk Format on user disk.
MAINTENANCE
(requires password)
Default Setting Start up the system initialization.
EXIT (power off)
For information about each function in the list above refer to the following pages.