Filter
Top Products
62
3.9 Touch Panel Calibration
Function
Adjusts the calibration of touch panel. If an inconsistency is noted between the target position
and the position actually touched on the touch panel, correct it by performing this calibration
adjustment.
Fig. 3.8
Operation
Adjustment of the calibration :
When the buzzer sounds, release the stylus from the touch panel.
If any improper operation has been done, press the “1” key to perform the touch panel
calibration again.
If the “2” key is pressed after the four positions have been touched, the calibration
adjustment result takes effect and the menu screen is restored. However, if the “ 2 “ key is
pressed before finishing on the fourth position, the adjustment process performed so far will
be canceled.