Filter
Top Products
207
Termination Codes and Messages
In the following table, termination codes and their error messages returned by FLINK.EXE
are described.
Error Code Error Message Description
Category
(High)
Detail
(Low)
Normal End
0x00 0x00 NORMAL ENDING
Normal end.
0xDC 0x00
A ZDRIVE FORMAT NOTICE
Format notification of drives A to Z.
0xF6 0x00 POWER OFF ENDING NOTICE
Notification of the end of the power.
0xF7 0x00 RESET ENDING NOTICE
Notification of the end of reset.
0xF8 0x00
BREAK KEY INTERRUPT ENDING
Notification of abortion by user.
Protocol Error
0x01 0x00 COMMAND ERROR
Command error (undefined function
code)
0x01 0x01 COMMAND ERROR
Command error (undefined sub-
function code)
0x01 0x02 COMMAND ERROR
Command cannot be executed.
0x01 0x03 CHECK SUM ERROR
Check-sum error
0x01 0x04 COMMAND SEQUENCE ERROR
Command sequence error.
0x01 0x05 SEQUENCE NUMBER ERROR
Sequence number error.
0x01 0x06 OTHER PROTOCOL ERROR
Protocol is illegal.
0x01 0x07 PARAMETER ERROR
Parameter error.
0x01 0x08 TIMEOUT ERROR
Timeout error.
File Error (INT21h)
0x02 0x02 FILE NOT FOUND
File cannot be found.
0x02 0x03 PATH NOT FOUND
Path cannot be found.
0x02 0x0B INVALID FORMAT
Invalid formatting.
0x02 0x0F INVALID DISK DRIVE
Invalid disk.
0x02 0x10 CANNOT DELETE DIRECTORY
Delete request is specified to current
directory.
0x02 0x11 NOT SAME DISK
Disk is not the same.
0x02 0x12 FILE NOTHING
File cannot be found.
Note:
Besides the detail codes which are defined in File Error (INT21h) above, other error codes may be
returned as extension error code of DOS.
File Error (INT24h)
0x03 0x13 WRITE PROTECT ERROR
Write protect error.
0x03 0x14 UNKNOWN UNIT
Undefined unit.
0x03 0x15 DRIVE NOT READY
Drive is not ready.
0x03 0x17 DATA ERROR (CRC)
Data error.
0x03 0x19 SEEK ERROR
Seek error.
0x03 0x1A UNKNOWN DISK FORMAT
Disk is not formatted.
0x03 0x1B SECTOR NOT FOUND
Sector cannot be found.
0x03 0x1D WRITE ERROR
Write error.
0x03 0x1E READ ERROR
Read error.
0x03 0x1F UNKNOWN ERROR
Error cannot be defined.
0x03 0x20 FILE SHARE ERROR
Specified file is already opened.
0x03 0x21 FILE LOCK ERROR
File lock error.
0x03 0x22 INVALID DISK CHANGED
Invalid disk exchange.
0x03 0x23 FCB FULL
FCB is full.
0x03 0x53 FATAL ERROR
Fatal error (Unsuccess INT24h).