Filter
Top Products
127
Termination Codes and Messages
Termination code Message Description
00 NORMAL END Normal termination
01 ABNORMAL END SYSDRVP or HWWMANP is not installed.
EMS memory driver was not enabled.
KEYPAD.DAT not found.
Parameter error
About the Key Input
If this simulator is resident in memory, input through the keypad is permitted by clicking in the
region that corresponds to each key, in addition to key input via the PC keyboard. (This is possible
irrespective of whether a simulated keypad is being displayed by the G/ option.)
About Coordinate Input
If the application is designed for input of coordinates through the KEY_Read function of the keypad
library, this simulator will implement the same process using the mouse pointer. In this case, if the
left mouse button is clicked DOWN/RUN/UP operations will be simulated. Right mouse button
clicks will be ignored.
Monitoring Keypad Display ON/OFF Status
If the F9 key is pressed, this simulator will show the keypad display ON/OFF status along with other
system library information.
Fig. 7.9