Filter
Top Products
147
Request of Suspend (Software-triggered OFF)
Used to turn off the system with the software. If there is a need to specify the next boot-up
process, complete "Setting Cancellation of Next Resume Process" beforehand, then call this
function.
SYNTAX
void SYS_PowerOff();
INPUT
None
OUTPUT
None
Acquisition of Low Battery Voltage Status
An APM (Advanced Power Management) BIOS has been installed in this terminal. This function is
used to directly refer the hardware conditions which are translated into input signals for the APM
BIOS.
SYNTAX
int SYS_GetLBStatus();
INPUT
None
OUTPUT
b0 Reserved
b1
LB1 event: Main battery voltage low.
b2
LB2 event: Sub-battery voltage low.
b3
LB3 event: Memory card battery voltage low.
b4 to b7 Reserved
Setting APO Time
Used to set a time until APO (Auto Power OFF) occurs.
SYNTAX
int SYS_GetApoTime (int nValue);
INPUT
nValue = APO time
0 Does not cause APO.
1 to 15 Causes APO in the specified-number of minutes plus
30 seconds.
The actual APO time has an error of +/- 25 seconds.