Filter
Top Products
31
To switch the Dial Tone check on
and off
Display shows FUNCTION 1-8.
Display shows TAD.
Display shows first option RING COUNT.
To display FAX DETECTOR.
Display shows = MODE A (or = MODE B).
Press the
ᮤ
or
ᮣ
button to change the
display to = MODE B (or = MODE A).
To confirm the setting. Display shows
next option RING COUNT.
To return to standby.
Display shows ON.
To display OFF.
To confirm the setting. Display shows
next option FAX DETECTION.
To return to standby.
If your fax machine interrupts when
messages are being left
When you have connected an answering
machine, your PaperJet 100 fax normally
hears fax tones which tell it whether the
caller is sending a fax or not. However,
some older fax machines do not send
the appropriate tones, and your
PaperJet 100 is pre-set to switch to fax
mode if no tones are detected. So if
your PaperJet 100 sometimes switches to
FAX while callers are trying to leave a
message, it may help to switch the TAD
SILENCE setting to
OFF.
Display shows FUNCTION 1-8.
Display shows TAD.
Display shows first option
RING COUNT.
To display TAD SILENCE.
When your PaperJet 100 is dialling out it
normally waits a short period before
actually dialling. This is to allow the line
to stabilise when the dial tone is heard.
It is possible to change the set up so that
instead of waiting a fixed period, the
PaperJet 100 won’t dial until it actually
hears the dial tone. There are three
available settings:-
OFF PBX/OFF PST – no dial tone check.
ON PBX/ON PST – dial tone check on if
PBX SELECTION is set on or off.
OFF PBX/ON PST – dial tone check on
only if
PBX SELECTION is set off.
The default setting for normal use in the
UK is
OFF PBX/OFF PST.
Display shows FUNCTION (1-8).
Display shows USER OPTIONS.
Display shows first option RESOL.
DEFAULT.
To display DIAL TONE CHECK.
Display shows = OFF PBX/OFF PST.
OPTIONAL SETTINGS