Filter
Top Products
Quality of Service guidelines
338 Avaya Application Solutions IP Telephony Deployment Guide
5.ip access-list-dscp
trust 100
trust-cos-dscp
Trust packet tagging.
6.interface
FabricFastEthernet 1
Activate the above mapping on ingress
traffic to the Fabric Fast Ethernet interface
7.ip access-group 100 in Apply the ACL to traffic that is arriving on
the FabricFastEthernet port.
8.exit
9.interface Serial 1 Apply the following commands to Interface
Serial 1.
10.voip-queue Activate “VoIP queue management mode”
on the serial interface.
11.exit
12.interface Serial 1 Apply the following commands to Interface
Serial 1.
13.ip rtp
header-compression
Enable cRTP (optional).
Table 61: X330 WAN Module administration commands (continued)
Command Meaning
2 of 2