Filter
Top Products
Avaya Application Solutions
32 Avaya Application Solutions IP Telephony Deployment Guide
Partially configured systems
For a partially configured system, a Standard profile is selected or a Custom profile is created
that contains some of the provisioning data. The profile contains a section for dynamic data,
which is either missing and needs to be added or is temporary and needs to be confirmed or
changed. The partially configured profile is either loaded onto the i40 or i120 Distributed Office
module or copied to a USB portable storage device before shipment to the branch location.
A Profile-based Setup Assistant is created as part of the profile. At installation, the Assistant
prompts the installer to add or change the dynamic data.
From-scratch configuration
If none of the profiles, including the default profile, is appropriate, the system can be reset to its
initial configuration by executing the nvram init command. In this case the Initial Setup
Assistant is used to enter the minimum provisioning data to make the system operable. Then
the remaining provisioning data is entered using Local Manager.