Filter
Top Products
DCP extender, stand alone
Issue 4 October 2002
45555-233-116
Wire the circuit pack to the MDF with a 25-pair cable:
1. Wire to the data adapter per local standards.
2. Wire the data terminal and telephone as instructed in the document
accompanying the data adapter.
DCP extender, stand alone
The stand alone extender installs at the work location. See Appendix A, Table 33,
‘‘DCP extender 25-pair cable pinout’’ for cabling information and pin assignments.
NOTE:
2-wire DCP extenders are not currently supported on G700 Media Gateway
configurations.
Figure 8 shows a typical connection from a digital line 2-wire DCP circuit pack
through two DCP extender devices. The DEFINITY Extender Switch Module
System Administrator’s Guide contains additional information.
Figure 8. Typical DCP extender connections
1. Avaya™ Media Server/Gateway
2. TN2181 or TN2224B circuit pack
3. 25-pair cable
4. DCP extender
5. Main distribution frame (MDF)
6. Public switched telephone network (PSTN)
7. 103A or modular wall jack
8. Modular line cord
9. DCP telephone (Such as 8410D,
8405, or 8434)
10. Remote work location