Filter
Top Products
Terminal server installation
555-233-116
128 Issue 4 October 2002
Administering the gateway
NOTE:
If the C-LAN circuit pack and IOLAN+ are in the same subnet, skip this step.
1. Select Admin mode > Password and press
ENTER.
2. Type iolan and press
ENTER.
3. Select gateway to access the Gateway menu
4. Fill in the following fields for Entry 1:
■ Destination: C-LAN IP address
■ Gateway: Gateway address
■ Netmask: Subnet mask
NOTE:
The following steps re-initialize the IOLAN+ so it knows it’s connected
to the LAN through your gateway.
5. Select reboot and press
ENTER.
6. Press the space bar to restart the IOLAN+.
Administering an IOLAN+ port
Use this procedure when connecting an adjunct or serial COM port on a PC
directly (locally) to the IOLAN+ (see Figure 23).
1. Select Admin mode > Password and press ENTER.
2. Type iolan and press
ENTER.
3. Select port and press
ENTER.
4. Type port number, where port number is the port that the adjunct
connects to, and press
ENTER to view the Port Setup Menu.