Filter
Top Products
Multimedia call handling (MMCH)
Issue 4 October 2002
217555-233-116
ProShare configuration
The ProShare system must be set up so that it does not look for a Service Profile
Identifier (SPID) when connecting to the Avaya Media Server. This is important
because you administer the ProShare as a single 7500 data set and the
telephone extension associated with that data set applies to both BRI channels.
1. Load the ProShare software onto the PC using the default values.
2. Enter the company name and serial number of the software.
3. Select the default directory location and install all files.
4. Answer NO to modem Setup.
5. Scroll through the list of countries and select the country in which the PC is
installed.
6. At the Protocol and Switch Mfg window, click on Custom. Click on AT&T
and click on Accept.
7. At the next window, choose PBX for Exchange Switch, and choose G3r (for
Release 8r) or G3i (for Release 8si) (as appropriate) as the PBX type. Click
on Accept.
8. Select yes or no for Phone Call Support.
9. A window with #Phone Numbers and #SPIDS appears. Set #Phone
Numbers to 1 and set #SPIDS to 0.
10. Click on the Aliases button and enter the last 5 digits of the data extension
number and an external alias.
11. Leave the telephone number at default and click on Accept.
12. Select restart windows.
Table 26. Minimum system requirements
Ve rs io n: 2.0 or higher
Minimum Processor Speed: 487/33 MHz, DX2/77
Disk Space: 7 MB
Memory: 12 MB RAM, 17 MB recommended
ISA Expansion Slots (17-bit): 2 slots
Monitor: 740x480, 257-color, VGA, SVGA
Operating System: Windows
™
3.1x or Windows
™
95